Vickers 2520V12A8 1DD22R Vane Pump

Ring Size:Standard; Self Aligning:Self Centering; Bearing Duty:Medium Duty; Anti-Rotation Pin:Yes; Flinger Type:Standard; d:1.9375 in; Bearing Locking Device:Concentric Clamp Col; Housing Coating:Powder Coat; Bearing Insert Material:Steel; Flinger Material:Steel;

s1:86.5 mm; T max.:200 °C; Weight:21.75 kg; Designation of housing:C320-; A3:4 mm; A:75 mm; d1:146 mm; B:100 mm; A5:50 mm; S:50 mm;

Z:78.6 mm; Dz:80 mm; H1:13 mm; N:M14; A1:27 mm; B:37.6 mm; C:25.7 kN; C0:15.2 kN; E:20 mm; Weight:1.73 kg;

A5:19.2 mm; A1:16 mm; s1:33.4 mm; Designation of housing:T210N-; d1:67.2 mm; Weight:2.4 kg; L3:86 mm; C:35.1 kN; C0:23.2 kN; L:149 mm;

S:7 mm; G:R1/8"; A1:10 mm; T min.:-20 °C; e:19 mm; Designation of open end cover:SCOU204-12; J:90 mm; Weight:0.46 kg; N:11,5mm; T max.:100 °C;

Da min:60 mm; Y0:1.17; da max:46 mm; Max operating temperature, Tmax:120 °C; Rating life coefficient, A2:1.9; d1:54 mm; db min:45.5 mm; r1a max:1 mm; ISO 355 reference:T2BE040; Mass:0.31 kg;

L1:54 mm; T min.:-20 °C; S:6 mm; e:15 mm; A:25.5 mm; C:9.55 kN; L:60 mm; Z:20.5 mm; T max.:200 °C; C0:4.78 kN;

Designation of bearing:UCX09G2; C:35.1 kN; T max.:100 °C; C0:23.2 kN; A:39.7 mm; J:111 mm; B:51.6 mm; A2:60.5 mm; e:27.9 mm; T min.:-20 °C;

d1:62 mm; Dz:95 mm; H:54 mm; H1:20 mm; Weight:2.55 kg; s1:39.7 mm; A1:37 mm; L:190 mm; C0:20.8 kN; B:42.8 mm;

L:100 mm; T min.:-20 °C; s1:15.5 mm; Recommended tightening torque for set screw:5.5 Nm; A:25.5 mm; B:31 mm; N:12mm; S:12.7 mm; G:M6x1; d:17 mm;

Retainer Material:Polymer; Seal Type:Triple Lip; Ball Material:Stainless Steel; Bearing Inner Ring Material:Steel; Ship Weight:2.45 LB; End Cap Groove:Yes; Bearing Bore Shape:Round; Brand:Baldor-Dodge; Base to Center Height:Standard; Bearing Outer Ring Material:Steel;

Radial clearance class:CN; Fatigue limit load, Cu:4.4 kN; B:16 mm; Da max:75 mm; r1s min:0.6 mm; Max operating temperature, Tmax:120 °C; Weight / Kilogram:0.296; Dynamic load, C:32 kN; E:72.5 mm; da min:55 mm;

s1:54 mm; G:M10x1; C0:140 kN; H:260 mm; A3:4 mm; Designation of housing:C320-; Weight:19.9 kg; C:171.6 kN; SW:7.94 mm; d:101.6 mm;

L1:90 mm; H2:83 mm; d:50 mm; Z:74.6 mm; Weight:2.58 kg; Recommended tightening torque for set screw:11.5 Nm; A:49 mm; B:43.5 mm; T max.:200 °C; Designation of bearing:US210G2T20;

Retainer Type:Std Retainer; Housing Coating:Powder Coat; Bearing Insert Material:Steel; Bearing Series:208 Series; Grease Type:Unirex N2; Ring Size:Standard; Brand:Baldor-Dodge; Flinger Material:Steel; End Cap Groove:Yes; Ball Grade:Class 10;