REXROTH S10P15-1X Valves

Calculation factor f2A:1; Ball diameter Dw:15.875 mm; Calculation factor f2D:1.18; Da max.:173 mm; Static axial stiffness, preload class A:152 N/µm; Calculation factor f:1.25; Db max.:176 mm; Reference grease quantity Gref:20.4 cm³; Static axial stiffness, preload class C:295 N/µm;

Appropriate attachment bolt size G:0.75 in; Adapter sleeve assembly:SNW 20x3.7/16; Pa:10.2 kN; Cap bolt:2 x 3/4-10 UNC; h:42.069 mm; H2:44.45 mm; L:387.35 mm; Bearing limiting speed:4800 r/min; PG:1/4 NPT; P60°:119 kN;

Accessories:Two Seals & Snap-Rin; d:60.000 mm; Grease Speed Rating Open/Shielded n1:6700 rpm; Basic Dynamic Radial Load Rating C:32500 N; Basic Static Radial Load Rating Co:25000 N; Fillet Radius ra:1.00 mm; B:18.00 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; D:95.0000 mm; Sealed Speed Rating n3

D:200 mm; B:69.85 mm; b1:mm; F:133 mm; Dynamic (Ca):464 kN; d2 (max):mm; b:mm; rs (min):2.1 mm; r1s (min):4 mm; d2:110 mm;

D:210.0000 mm; B:28.00 mm; Basic Static Radial Load Rating Co:150000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; d:150.000 mm; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:125000 N; Oil Speed Rating n2:3400 rpm;

Fillet Radius rb:1.00 mm; B:50.00 mm; Basic Static Radial Load Rating Co:255000 N; Grease Speed Rating n1:2600 rpm; d:110.000 mm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:3200 rpm; D:240.0000 mm; Basic Dynamic Radial Load Rating C:255000 N;

r1,2 min.:7.5 mm; Da max.:1392 mm; Basic static load rating C0:40500 kN; d1:950 mm; B2 ≈:519 mm; Calculation factor e:0.26; Reference speed:160 r/min; G1:57 mm; K:12 mm; D1 ≈:1278 mm;

Accessories:One Seal; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:3600 rpm; Oil Speed Rating n2:4800 rpm; B:38.10 mm; Sealed Speed Rating n3:3600 rpm; Basic Static Radial Load Rating Co:106000 N; d:65.000 mm; Basic Dynamic Radial Load Rating C:88000 N; D:120.0000 mm;

Basic static load rating C0:33.5 kN; D:60 mm; Frictional moment:0.1 N·m; d2:26.7 mm; Mass bearing:0.42 kg; Static moment stiffness:65 N·m/mrad; d:15 mm; Angle between holes in outer ring (Pitch) α:60 °; N:6.8 mm; r1,2 min.:0.3 mm;

B:34.00 mm; Basic Static Radial Load Rating Co:39000 N; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:8500 rpm; d:35.000 mm; Basic Dynamic Radial Load Rating C:47500 N; Grease Speed Rating n1:6300 rpm; Fillet Radius rb:0.60 mm; D:72.0000 mm;

Basic Static Radial Load Rating Co:51000 N; Accessories:Two Shields & Snap-R; Sealed Speed Rating n3:2800 rpm; d:90.000 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; Fillet Radius ra:1.50 mm; D:140.0000 mm; Basic Dynamic Radial Load Rating C:61800 N; B:24.00 mm; Oil Speed Rating Open/Shielded n

rs (min):2.1 mm; Oil:179.000 kN; Static (Cor):8.3 mm; D:380 mm; Dynamic (Cr):4.5 mm; Grease:2100 kN; with cylindrical bore:1 000 min-1; Pu:1000 kN; B:75 mm; with tapered bore:1 400 min-1;

P120°:249 kN; L:869.95 mm; P180°:267 kN; Da:419.999 mm; A2:317.5 mm; Initial grease fill:3515.4 g; Cap bolt, SAE grade:8; Cap bolt:4 x 1 1/2-6 UNC; H2:101.6 mm; H1:250.825 mm;

r3,4 min.:5 mm; d1 ≈:304.8 mm; d:220 mm; Mass angle ring:6.4 kg; B2:36 mm; B1:19 mm;

Mass inner ring:0.0052 kg; F:13 mm; B:12.5 mm; d:10 mm; r, r1,2 min.:0.3 mm;